Predefined QoS Classes
Chapter 9: Using Traffic Shaper 257
Shaper will handle outgoing VPN traffic as specified in the bandwidth policy for the
Urgent class.
See Adding and Editing Rules on page
338.
Note: Traffic Shaper must be enabled for the direction of traffic specified in the rule.
Note: If you do not assign a connection type to a class, Traffic Shaper automatically
assigns the connection type to the built-in "Default" class.
Predefined QoS Classes
Traffic Shaper provides the following predefined QoS classes.
To assign traffic to these classes, define firewall rules as described in Using Rules on page
334.
Table 47: Predefined QoS Classes
Class Weight Delay Sensitivity Useful for
Default 10 Medium
(Normal Traffic)
Normal traffic.
All traffic is assigned to this class by default.
To Next Page
Loading...
