Using the Internet Wizard
106 Check Point UTM-1 Edge User Guide
Table 25: PPPoE Connection Fields
In this field… Do this…
IP Address Type the static IP address of your UTM-1 appliance.
Subnet Mask Select the subnet mask that applies to the static IP address of your
UTM-1 appliance.
Default Gateway Type the IP address of your ISP’s default gateway.
Primary DNS Server Type the Primary DNS server IP address.
Secondary DNS Server Type the Secondary DNS server IP address.
This field is optional.
WINS Server Type the WINS server IP address.
This field is optional.
Using a DHCP Connection
No further settings are required for a DHCP (Dynamic IP) connection. The Confirmation
screen appears.
1. Click Next.
The system attempts to connect to the Internet via the specified connection.
The Connecting… screen appears.
At the end of the connection process the Connected screen appears.
2. Click Finish.
To Next Page
Loading...
