Using Internet Setup
Chapter 5: Configuring the Internet Connection 141
In this field… Do this…
MAC Cloning A MAC address is a 12-digit identifier assigned to every network device. If
your ISP restricts connections to specific, recognized MAC addresses, you
must select this option to clone a MAC address.
Note: When configuring MAC cloning for the secondary Internet
connection, the DMZ/WAN2 port must be configured as WAN2; otherwise
this field is disabled. For information on configuring ports, see Managing
Ports on page
209.
Hardware MAC
Address
This field displays the UTM-1 appliance's MAC address.
This field is read-only.
Cloned MAC
Address
Do one of the following:
• Click This Computer to automatically "clone" the MAC address of
your computer to the UTM-1 appliance.
• If the ISP requires authentication using the MAC address of a
different computer, type the MAC address in this field.
Note: In the secondary Internet connection, this field is enabled only if the
DMZ/WAN2 port is set to WAN2.
To Next Page
Loading...
