Check Point UTM-1 Edge - Page 210

Using Network Objects
196 Check Point UTM-1 Edge User Guide
Table 34: Network Object Fields for a Single Computer
In this field… Do this…
IP Address
Type the IP address of the local computer, or click This Computer to
specify your computer.
Reserve a fixed IP
address for this
computer
Select this option to assign the network object's IP address to a MAC
address, and to allow the network object to connect to the WLAN
when MAC Filtering is used. For information about MAC Filtering, see
Configuring a Wireless Network on page
265.
MAC Address Type the MAC address you want to assign to the network object's IP
address, or click This Computer to specify your computer's MAC
address.
Perform Static NAT
(Network Address
Translation)
Select this option to map the local computer's IP address to an
Internet IP address.
You must then fill in the External IP field.
External IP Type the Internet IP address to which you want to map the local
computer's IP address.
Exclude this computer
from HotSpot
enforcement
Select this option to exclude this computer from Secure HotSpot
enforcement.
This computer will be able to access the network without viewing the
My HotSpot page. Furthermore, users on HotSpot networks will be
able to access this computer without viewing the My HotSpot page.
Exclude this computer
from Web Filtering
Select this option to exclude this computer from the Web Filtering
service and Web rule enforcement.