Check Point UTM-1 Edge - Page 224

Managing Ports
210 Check Point UTM-1 Edge User Guide
You can assign this port... To these uses...
USB Printers
USB-based modems
The UTM-1 appliance also allows you to restrict each port to a specific link speed and
duplex setting and to configure its security scheme. For information on port-based security,
see Using Port-Based Security on page
347.
Viewing Port Statuses
You can view the status of the UTM-1 appliance's ports on the Ports page, including each
Ethernet connection's duplex state. This is useful if you need to check whether the
appliance's physical connections are working, and you can’t see the LEDs on front of the
appliance.
To view port statuses
1. Click Network in the main menu, and click the Ports tab.