Managing Ports
Chapter 6: Managing Your Network 213
Table 39: Ports Fields
This field… Displays…
Assign To The port's current assignment.
For example, if the DMZ/WAN2 port is currently used for the DMZ, the
field displays "DMZ".
Status The port's current status. This can be any of the following:
• The detected link speed and duplex (Full Duplex or Half
Duplex)
• No Link. The appliance does not detect anything connected
to the port.
• Disabled. The port is disabled. For example, the DMZ/WAN2
port's status will be "Disabled" if the port is assigned to
"None", or if it assigned to "DMZ" and the DMZ is disabled.
• No Sync. The ADSL modem failed to synchronize with the
ADSL service provider. Check that a micro-filter is properly
connected, and check that your DSL Standard setting is
compatible with your service provider. You can view this
setting in the Network > Internet Setup page.
This status is relevant for the ADSL port only.
• Connected (number). USB devices (printers or modem) are
connected to the USB ports. The number of connected
devices appears in parentheses.
This status is relevant for the USB ports only.
• Not Connected. No USB devices are connected to the USB
ports.
This status is relevant for the USB ports only.
To Next Page
Loading...
