SmartDefense Categories
Chapter 13: Using SmartDefense 405
In this field… Do this…
Log Mode Specify upon which events logs should be issued, by selecting one of the
following:
• None. Do not issue logs.
• Log per attack. Issue logs for each SYN attack. This is the default.
• Log individual unfinished handshakes. Issue logs for each incomplete
handshake.
This field is only relevant if the Track field is set to Log.
Maximum time for
completing the
handshake
Type the maximum amount of time in seconds after which a TCP handshake
is considered incomplete.
The default value is 10 seconds.
Protect external
interfaces only
Specify whether SynDefender should be enabled for external (WAN)
interfaces only, by selecting one of the following:
• Disabled. Enable SynDefender for all the firewall interfaces. This
is the default.
• Enabled. Enable SynDefender for external interfaces only.
To Next Page
Loading...
