Check Point UTM-1 Edge - Page 452

Configuring VStream Antivirus
438 Check Point UTM-1 Edge User Guide
Enabling/Disabling VStream Antivirus Rules
You can temporarily disable a VStream Antivirus rule.
To enable/disable a VStream Antivirus rule
1. Click Antivirus in the main menu, and click the Policy tab.
The Antivirus Policy page appears.
2. Next to the desired rule, do one of the following:
• To enable the rule, click
.
The button changes to
and the rule is enabled.
• To disable the rule, click
.
The button changes to
and the rule is disabled.
Changing VStream Antivirus Rules' Priority
To change a VStream Antivirus rule's priority
1. Click Antivirus in the main menu, and click the Policy tab.
The Antivirus Policy page appears.
2. Do one of the following:
• Click
next to the desired rule, to move the rule up in the table.
• Click
next to the desired rule, to move the rule down in the table.
The rule's priority changes accordingly.