Using RADIUS Authentication
558 Check Point UTM-1 Edge User Guide
In this field… Do this…
Administrator Level Select the level of access to the UTM-1 Portal to assign to all users
authenticated by the RADIUS server.
The levels are:
• No Access: The user cannot access the UTM-1 Portal.
• Read Only: The user can log on to the UTM-1 Portal, but
cannot modify system settings or export the appliance
configuration via the Setup>Tools page. For example, you
could assign this administrator level to technical support
personnel who need to view the Event Log.
• Users Manager. The user can log on to the UTM-1 Portal and
add, edit, or delete "No Access"-level users. However, the
user cannot modify other system settings. For example, you
could assign this administrator level to clerks who need to
manage HotSpot users.
• Read/Write: The user can log on to the UTM-1 Portal and
modify system settings.
The default level is No Access.
VPN Remote Access Select this option to allow all users authenticated by the RADIUS server
to connect to this UTM-1 appliance using their VPN client.
For further information on setting up VPN remote access, see Setting
Up Remote VPN Access for Users on page
553.
Web Filtering
Override
Select this option to allow all users authenticated by the RADIUS server
to override Web Filtering.
This option only appears if the Web Filtering service is defined.
To Next Page