Cisco 2100 Series Configuration Guide

8-40
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 8 Controlling Mesh Access Points
Viewing Mesh Statistics and Reports
Step 2 To view statistics for a specific access point, hover your cursor over the blue drop-down arrow for the
desired access point and choose Statistics. The All APs > Access Point Name > Statistics page for the
access point appears (see Figure 8-19).
Figure 8-19 All APs > Access Point Name > Statistics Page
This page shows the role of the access point in the mesh network, the name of the bridge group to which
the access point belongs, the backhaul interface on which the access point operates, and the number of
the physical switch port. It also displays a variety of mesh statistics for this access point. Table 8-7
describes each of the statistics.

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)