Cisco 2100 Series Configuration Guide

Contents
viii
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Using the CLI to View Cisco Discovery Protocol Information 4-78
Configuring RFID Tag Tracking 4-79
Using the CLI to Configure RFID Tag Tracking 4-81
Using the CLI to View RFID Tag Tracking Information 4-82
Using the CLI to Debug RFID Tag Tracking Issues 4-83
Configuring and Viewing Location Settings 4-84
Installing the Location Appliance Certificate 4-84
Modifying the NMSP Notification Interval for Clients, RFID Tags, and Rogues 4-85
Synchronizing the Controller and Location Appliance 4-86
Using the CLI to View Location Settings 4-86
Configuring the Supervisor 720 to Support the WiSM 4-89
General WiSM Guidelines 4-90
Configuring the Supervisor 4-90
Using the Wireless LAN Controller Network Module 4-91
CHAPTER 5 Configuring Security Solutions 5-1
Cisco UWN Solution Security 5-2
Security Overview 5-2
Layer 1 Solutions 5-2
Layer 2 Solutions 5-2
Layer 3 Solutions 5-3
Integrated Security Solutions 5-3
Configuring RADIUS 5-3
Configuring RADIUS on the ACS 5-4
Using the GUI to Configure RADIUS 5-6
Using the CLI to Configure RADIUS 5-11
RADIUS Authentication Attributes Sent by the Access Point 5-15
RADIUS Accounting Attributes 5-17
Configuring TACACS+ 5-18
Configuring TACACS+ on the ACS 5-19
Using the GUI to Configure TACACS+ 5-23
Using the CLI to Configure TACACS+ 5-25
Viewing the TACACS+ Administration Server Logs 5-27
Configuring Local Network Users 5-29
Using the GUI to Configure Local Network Users 5-30
Using the CLI to Configure Local Network Users 5-32
Configuring LDAP 5-33
Using the GUI to Configure LDAP 5-33
Using the CLI to Configure LDAP 5-36

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)