Cisco 2100 Series Configuration Guide

Contents
ix
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Configuring Local EAP 5-38
Using the GUI to Configure Local EAP 5-40
Using the CLI to Configure Local EAP 5-45
Configuring the System for SpectraLink NetLink Telephones 5-50
Using the GUI to Enable Long Preambles 5-50
Using the CLI to Enable Long Preambles 5-51
Using the CLI to Configure Enhanced Distributed Channel Access 5-52
Using Management over Wireless 5-52
Using the GUI to Enable Management over Wireless 5-52
Using the CLI to Enable Management over Wireless 5-52
Configuring DHCP Option 82 5-53
Configuring and Applying Access Control Lists 5-54
Using the GUI to Configure Access Control Lists 5-55
Using the GUI to Apply Access Control Lists 5-59
Applying an Access Control List to an Interface 5-59
Applying an Access Control List to the Controller CPU 5-60
Applying an Access Control List to a WLAN 5-61
Applying a Preauthentication Access Control List to a WLAN 5-62
Using the CLI to Configure Access Control Lists 5-63
Using the CLI to Apply Access Control Lists 5-65
Configuring Management Frame Protection 5-66
Guidelines for Using MFP 5-67
Using the GUI to Configure MFP 5-68
Using the GUI to View MFP Settings 5-69
Using the CLI to Configure MFP 5-70
Using the CLI to View MFP Settings 5-71
Using the CLI to Debug MFP Issues 5-73
Configuring Client Exclusion Policies 5-73
Configuring Identity Networking 5-74
Identity Networking Overview 5-74
RADIUS Attributes Used in Identity Networking 5-75
QoS-Level 5-75
ACL-Name 5-75
Interface-Name 5-76
VLAN-Tag 5-76
Tunnel Attributes 5-77
Configuring AAA Override 5-78
Updating the RADIUS Server Dictionary File for Proper QoS Values 5-78
Using the GUI to Configure AAA Override 5-79

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)