Cisco Catalyst 3560X-24P User Manual

2-557
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show diagnostic
3) TestPortAsicCam -----------------> B*D*X**IR* not configured n/a
4) TestPortAsicRingLoopback --------> B*D*X**IR* not configured n/a
5) TestMicRingLoopback -------------> B*D*X**IR* not configured n/a
6) TestPortAsicMem -----------------> B*D*X**IR* not configured n/a
7) TestInlinePwrCtlr ---------------> B*D*X**IR* not configured n/a
<output truncated>
Note If you enter the show diagnostic content switch all command on a non-PoE-capable switch,
information about test 7, TestInlinePwrCtlr, does not appear in the command output.
This example shows how to display the diagnostic test results on a switch. You can also use the show
diagnostic switch command to display these diagnostic results.
Switch> show diagnostic result
Switch 1: SerialNo : CAT1007R044
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
1) TestPortAsicStackPortLoopback ---> .
2) TestPortAsicLoopback ------------> U
3) TestPortAsicCam -----------------> U
4) TestPortAsicRingLoopback --------> U
5) TestMicRingLoopback -------------> U
6) TestPortAsicMem -----------------> U
7) TestInlinePwrCtlr ---------------> U
This example shows how to display the running tests in a switch stack:
Switch> show diagnostic status
<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
<OD> - OnDemand Diagnostics, <SCH> - Scheduled Diagnostics
====== ================================= =============================== ======
Card Description Current Running Test Run by
------ --------------------------------- --------------------- ------
1 N/A N/A
2 TestPortAsicStackPortLoopback <OD>
TestPortAsicLoopback <OD>
TestPortAsicCam <OD>
TestPortAsicRingLoopback <OD>
TestMicRingLoopback <OD>
TestPortAsicMem <OD>
3 N/A N/A
4 N/A N/A
====== ================================= =============================== ======
<output truncated>
This example shows how to display the online diagnostic test schedule for a switch:
Switch> show diagnostic schedule
Current Time = 14:39:49 PST Tue Jul 5 2005
Diagnostic for Switch 1:
Schedule #1:
To be run daily 12:00
Test ID(s) to be executed: 1.

Cisco Catalyst 3560X-24P Specifications

General

Brand	Cisco
Model	Catalyst 3560X-24P
Category	Switch
Language	English