44-46
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 44 Configuring 802.1X Port-Based Authentication
Configuring 802.1X Port-Based Authentication
Figure 44-12 shows how members of the group you are configuring are denied all access to the
10.100.60.0 subnet, are denied HTTP access to the server at 10.100.10.116, and are permitted
everywhere else.
Figure 44-12 Define the ACEs for the Per-User ACL
Note Outbound ACLs (OUTACL) are not supported.
Filter-Id Configuration in ACS
In the Group/User Setting page, scroll down to the IETF RADIUS Attributes section. Select the box next
to Filter-Id and enter the ACL to apply for members of this group (Figure 44-13).
The Filter-Id ia in this format:
ACL_#.in
ACL
Number of the ACL that was previously configured on the switch
To Next Page
Loading...
