Index
IN-32
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL-23818-01
sessions
creating
55-17
defined 55-3
limiting source traffic to specific VLANs 55-23
monitoring VLANs 55-21
removing source (monitored) ports 55-20
specifying monitored ports 55-17
source ports 55-4
transmitted traffic 55-4
VLAN-based 55-5
RSTP
compatibility
20-23
description 20-22
port roles 20-24
port states 20-24
S
SAID
See 802.10 SAID
SAP
defined
43-9
negotiation 43-9
support 43-1
scheduling 40-8
scheduling, IP SLAs operations 66-5
secondary edge port, REP 22-4
secondary root switch 20-12
secondary VLANs 42-2
associating with primary 42-16
permitting routing 42-23
security
configuring
48-1
Security Association Identifier
See 802.10 SAID
Security Exchange Protocol
See SXP
Security Exchange Protocol
See SAP
selecting a power management mode
12-9
selecting X2/TwinGig Convertor Mode 7-14
sequence numbers in log messages 58-7
server IDs
description
65-23
service policy, configure class-level queue-limit 40-30
service-policy input command 31-2
service-provider networks
and customer VLANs
27-2
session keys, MKA 43-2
set default interface command 38-6, 38-7
set interface command 38-6
set ip default next-hop command 38-6
set ip next-hop command 38-6
set-request operation 60-4
severity levels, defining in system messages 58-8
shaping, QoS on Sup 6-E 40-24
sharing(bandwidth), QoS on Sup 6-E 40-26
Shell functions
See Auto SmartPorts macros
See Auto Smartports macros
Shell triggers
See Auto SmartPorts macros
See Auto Smartports macros
show adjacency command
33-9
show boot command 3-32
show catalyst4000 chassis-mac-address command 20-3
show cdp command 28-2, 28-3
show cdp entry command 28-4
show cdp interface command 28-3
show cdp neighbors command 28-4
show cdp traffic command 28-4
show ciscoview package command 4-41
show ciscoview version command 4-41
show cluster members command 14-13
show configuration command 7-22
show debugging command 28-4
show environment command 12-2
show history command 2-4
To Next Page
Loading...
