Cisco Catalyst 4500 Series - Page 1607

Index
IN-41
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-23818-01
using in your network 51-22
VLAN maps, PACL and Router ACLs 51-32
VLANs
allowed on trunk
17-5
configuration guidelines 15-3
configuring 15-5
configuring as Layer 3 interfaces 32-7
customer numbering in service-provider
networks
27-3
default configuration 15-4
description 1-10
extended range 15-3
IDs (default) 15-5
interface assignment 15-7
limiting source traffic with RSPAN 55-23
monitoring with RSPAN 55-21
name (default) 15-5
normal range 15-3
overview 15-1
reserved range 15-3
See also PVLANs
VLAN Trunking Protocol
See VTP
VLAN trunks
overview
17-3
VLAN User Distribution, configuring 802.1X 44-66
VMPS
configuration file example
15-32
configuring dynamic access ports on client 15-25
configuring retry interval 15-27
database configuration file 15-32
dynamic port membership
example
15-29
reconfirming 15-26
reconfirming assignments 15-26
reconfirming membership interval 15-26
server overview 15-21
VMPS client
administering and monitoring
15-28
configure switch
configure reconfirmation interval
15-26
dynamic ports 15-25
entering IP VMPS address 15-24
reconfirmation interval 15-27
reconfirm VLAM membership 15-26
default configuration 15-24
dynamic VLAN membership overview 15-23
troubleshooting dynamic port VLAN
membership
15-29
VMPS server
fall-back VLAN
15-23
illegal VMPS client requests 15-23
overview 15-21
security modes
multiple
15-22
open 15-22
secure 15-22
voice interfaces
configuring
41-1
Voice over IP
configuring
41-1
voice ports
configuring VVID
41-3
voice traffic 13-2, 41-5
voice VLAN
IP phone data traffic, described
41-2
IP phone voice traffic, described 41-2
Voice VLAN, configure 802.1X 44-70
voice VLAN ports
using 802.1X
44-22
VPN
configuring routing in
39-12
forwarding 39-3
in service provider networks 39-1
routes 39-2
routing and forwarding table
See VRF
VRF