Contents
xlix
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Configuring Message Severity Threshold 65-8
Configuring Syslog Pattern Matching 65-9
Configuring General E-Mail Options 65-9
Enabling Call Home 65-10
Testing Call Home Communications 65-10
Sending a Call Home Test Message Manually 65-11
Sending a Call Home Alert Group Message Manually 65-11
Sending a Request for an Analysis and Report 65-12
Sending the Output of a Command 65-13
Configuring and Enabling Smart Call Home 65-13
Displaying Call Home Configuration Information 65-14
Call Home Default Settings 65-18
Alert Group Trigger Events and Commands 65-18
Message Contents 65-21
Syslog Alert Notification in Long-Text Format Example 65-25
Syslog Alert Notification in XML Format Example 65-28
CHAPTER
66 Configuring Cisco IOS IP SLA Operations 66-1
Understanding Cisco IOS IP SLAs 66-2
Using Cisco IOS IP SLAs to Measure Network Performance 66-3
IP SLAs Responder and IP SLAs Control Protocol 66-4
Response Time Computation for IP SLAs 66-4
IP SLAs Operation Scheduling 66-5
IP SLAs Operation Threshold Monitoring 66-5
Configuring IP SLAs Operations 66-6
IP SLA Default Configuration 66-6
IP SLA Configuration Guidelines 66-6
Configuring the IP SLAs Responder 66-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 66-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 66-11
Monitoring IP SLAs Operations 66-13
CHAPTER
67 Configuring RMON 67-1
About RMON 67-1
Configuring RMON 67-3
Default RMON Configuration 67-3
Configuring RMON Alarms and Events 67-3
Configuring RMON Collection on an Interface 67-5
To Next Page
Loading...
