Contents
xlviii
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
OAM Messages 63-34
Enabling and Configuring Ethernet OAM 63-35
Ethernet OAM Default Configuration 63-35
Ethernet OAM Configuration Guidelines 63-35
Enabling Ethernet OAM on an Interface 63-36
Enabling Ethernet OAM Remote Loopback 63-37
Configuring Ethernet OAM Link Monitoring 63-38
Configuring Ethernet OAM Remote Failure Indications 63-42
Configuring Ethernet OAM Templates 63-45
Displaying Ethernet OAM Protocol Information 63-49
Ethernet CFM and Ethernet OAM Interaction 63-51
Configuring Ethernet OAM Interaction with CFM 63-51
Configuring the OAM Manager 63-52
Enabling Ethernet OAM 63-52
Example: Configuring Ethernet OAM and CFM 63-53
CHAPTER
64 Configuring Y.1731 (AIS and RDI) 64-1
AIS and RDI Terminology 64-1
About Y.1731 64-2
Server MEP 64-2
Alarm Indication Signal 64-2
Ethernet Remote Defect Indication 64-3
Configuring Y.1731 64-4
Y.1731 Configuration Guidelines 64-4
Configuring AIS Parameters 64-5
Clearing MEP from the AIS Defect Condition 64-6
Clearing SMEP from the AIS Defect Condition 64-6
Displaying Y.1731 Information 64-6
CHAPTER
65 Configuring Call Home 65-1
About Call Home 65-2
Obtaining Smart Call Home 65-2
Configuring Call Home 65-3
Configuring Contact Information 65-4
Configuring Destination Profiles 65-5
Copying a Destination Profile 65-6
Subscribing to Alert Groups 65-6
Configuring Periodic Notification 65-8
To Next Page
Loading...
