Cisco D9824 User Manual

Chapter 5 Web GUI Setup and Monitoring
158
2 Click the IP tab.
3 In the MOIP Input Selection area, check the Use MOIP Input check box to tune
to the MPEG over IP Input.
Note: Setting a new input to be active will deactivate the currently active input.
4 Choose UserCfg from the Source IP Selection Mode drop-down list to lock to
the source IP input set by the user, or choose SW Map to automatically detect
and select which stream to tune to.

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English