Cisco D9824 User Manual

Chapter 6 Service and Maintenance
336
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Restore Failure
Reason
Set
Not Accepted
Cause: Import file is
either for a different
product or the structure
was not compatible with
this unit.
Remedy: Verify that the
correct import file is
being used and was
created by this product,
and that the file
structure has not been
corrupted. If the
problem persists, notify
Cisco Services.
Import file was
rejected and import
did not occur
89100
Restore Failure
Reason
Set
Bad Content
Cause: Import file may
be corrupted, or from a
different version of
application software.
Remedy: Verify that the
correct import file is
being used and was
created by this product,
and that the file
structure has not been
corrupted. If the
problem persists, notify
Cisco Services.
Item in import file is
not valid for this
software and import
did not occur
89100
SDI Aud SFR
Data
Set
SDI Audio
sampling
frequency
mismatch
Cause: The SDI audio
groups are not
configured correctly, or
the transport stream has
changed the sampling
rate of one of the audio
streams.
Remedy: Configure the
SDI audio groups to
ensure that all audio
channels in a group
have the same sampling
frequency rate.
All audio channels in a
given audio group
within an SDI do not
have identical
sampling rate.
90000
SDI Aud SFR
Data
Clear
SDI Audio SFR
Mismatch
Cleared
–
–
90000

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English