Cisco D9858 User Manual

Chapter 4 Front Panel Oper ation
100
DPM - Global
Menu Item
Description
Parameters
Resync All:
Select to resynchronize all DPM
output with the PMT data for
all program entries on the
selected output.
ASI
Regenerate
Selects whether to regenerate
the PSI tables in the output.
Always or As Needed
Always - All tables are regenerated.
As Needed - Only regenerate the
tables if the content has changed.
Copy:
This copies all DPM data from
either the ASI output to the
MOIP output (MPEG over IP)
or from the MOIP output to the
ASI output depending on your
selection.
ASI->MOIP or MOIP->ASI
ASI/MOIP
Menu Item
Description
Parameters
PE
Select the Program Entry to
configure.
1 or 2 (main program)
1A or 2A (auxiliary program)
InCh
Displays the channel number to
which the PE is tuned. This is
read-only.
1 to 65535
PMT
Indicates the input PID value of
the Program Map Table for the
current channel. This is read-
only.
2 to 8190

Cisco D9858 Specifications

General

Brand	Cisco
Model	D9858
Category	Receiver
Language	English