Chapter 4 Front Panel Operation
The Options menu has the following structure:
Select 1 to configure the ASI
output or select 2 to configure
the MPEG over IP output.
Sets whether the DPM assigns
new values for all the output
channels and PIDs according to
the options below when you
Resynchronize All.
Set to Yes to use the input
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
First PE channel to use if the
Use Inp Chan/PMT/PIDs is set
to No.
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
To Next Page
Loading...
