Configuring Transport Stream Information
3 Select the program entry you want to edit.
If you want to configure an auxiliary PE, we highly recommend that you
perform the following:
- From the Enable Auto Map For Auxiliary PEs drop-down list, choose Yes in
the ASI Outputs page.
- Set PxA to Map.
- Click Resynchronize All to ensure that the inputs and outputs are the same.
4 Select the program entry you want to edit.
5 Click Edit. The DPM PE PID MAP window opens.
6 In the Output Channel # field, enter the output channel number you want to
map to the input channel (Input Channel #). This value is only used if the PE
Action was set to Map. You can enter a range from 1 to 65535.
7 In the Output PMT PID field, enter the output PMT PID you want to map to the
Input PMT PID.
8 In the PE PID MAP area, you can select an existing PID mapping entry you want
to modify or click Add Row to create a new entry.
9 The Input Stream indicates the input program stream category/service type. The
Input PID displays the input program PID (1 to 8190). It is only used if the PID
Action is set to Map.
10 From the Action drop-down list, choose the DPM action for the PID associated
with the PE.
To Next Page
Loading...
Need help?
General
