Cisco Firepower 4100 Command Reference

DescriptionField
Internal handshake failure
BPDUGuard triggered error disable
Port is disabled
error disabled due to security violation
tunnel interface is down because mode is not configured
tunnel interface is down because source is not configured
tunnel interface is down because destination is not configured
tunnel interface is down because could not resolved ip-address associated with tunnel
source interface
tunnel interface is down because could not resolved ip-address associated with tunnel
destination
tunnel interface is down because vrf configured to tunnel interface is down
Interface is error disabled becasue of STP inconsistency on VPC peer-link
Interface is error disabled becasue of STP set port state failure
port channel is down because it was suspended by vpc
vpc configuration is in progress
vpc peer-link is down
vpc down because failed to receive response from peer
vpc down because compatibility check failed
Not enough free entries in TCAM bank
tunnel interface is down because tunnel source interface is down
Error disabled due to IP address conflict
Pinned fabric port is down
Invalid fabric port
FEX fabric sfp invalid
SDP timeout/SFP Mismatch
FEX identity mismatch
FEX ID not configured on fabric port
Error disabled due to IP QoS policy application failure
Router mac allocation failed
VLAN/BD does not exist
VLAN/BD is down
VLAN type is invalid
DCX Multiple MSAP IDs recieved for the port
Cisco Firepower 4100/9300 FXOS Command Reference
289
S Commands
show interface brief (connect fxos)

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English