Cisco IE 4000

313
Configuring Voice VLAN
Configuration Examples for Configuring Voice VLAN
Configuration Examples for Configuring Voice VLAN
Configuring the Cisco IP Phone Priority of Incoming Data Frames: Example
This example shows how to configure a port connected to a Cisco IP phone to not change the priority of frames received
from the PC or the attached device:
Switch(config)# interface GigabitEthernet1/17
Switch(config-if)# switchport priority extend trust
Switch(config-if)# end
Additional References for Configuring Voice VLAN
The following sections provide references related to switch administration: