EasyManua.ls Logo

Cisco IE 4000

Cisco IE 4000
1066 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
764
Configuring IPv6 MLD Snooping
Configuration Example
Configuration Example
This example shows how to enable MLD snooping globally:
Switch(config)# ipv6 mld snooping
This example shows how to enable MLD snooping on a VLAN:
Switch(config)# ipv6 mld snooping vlan 100
This example shows how to statically configure an IPv6 multicast group:
Switch# configure terminal
Switch(config)# ipv6 mld snooping vlan 2 static FF12::3 interface gigabitethernet0/1
Switch(config)# end
Table 46-61
Command Purpose
show ipv6 mld snooping [vlan vlan-id] Display the MLD snooping configuration information for all
VLANs on the switch or for a specified VLAN.
(Optional) Enter vlan vlan-id to display information for a
single VLAN. The VLAN ID range is 1 to 1001 and 1006 to
4094.
show ipv6 mld snooping mrouter [vlan
vlan-id]
Display information on dynamically learned and manually
configured multicast router interfaces. When you enable
MLD snooping, the switch automatically learns the
interface to which a multicast router is connected. These
are dynamically learned interfaces.
(Optional) Enter vlan vlan-id to display information for a
single VLAN. The VLAN ID range is 1 to 1001 and 1006 to
4094.
show ipv6 mld snooping querier [vlan
vlan-id]
Display information about the IPv6 address and incoming
port for the most-recently received MLD query messages
in the VLAN.
(Optional) Enter vlan vlan-id to display information for a
single VLAN.The VLAN ID range is 1 to 1001 and 1006 to
4094.
show ipv6 mld snooping
multicast-address [vlan vlan-id] [count
| dynamic | user]
Display all IPv6 multicast address information or specific
IPv6 multicast address information for the switch or a
VLAN.
Enter count to show the group count on the switch or
in a VLAN.
Enter dynamic to display MLD snooping learned
group information for the switch or for a VLAN.
Enter user to display MLD snooping user-configured
group information for the switch or for a VLAN.
show ipv6 mld snooping
multicast-address vlan vlan-id
[ipv6-multicast-address]
Display MLD snooping for the specified VLAN and IPv6
multicast address.

Table of Contents

Other manuals for Cisco IE 4000

Related product manuals