Cisco IE 4000 Software Configuration Guide

880
Configuring IP Unicast Routing
Configuring ISO CLNS Routing
 Designated router election priority, which allows you to reduce the number of adjacencies required on a multiaccess
network, which in turn reduces the amount of routing protocol traffic and the size of the topology database.
 The interface circuit type, which is the type of adjacency desired for neighbors on the specified interface.
 Password authentication for the interface.
BEFORE YOU BEGIN
Enable IS-IS routing as described in the Enabling IS-IS Routing, page 873.

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports