Cisco NCS 2000 series Troubleshoot Manual

Step 4 If you have not been using a test set, or if the test set is correctly set up, the error is in the provisioned CTC circuit size.
Complete the Delete a Circuit, on page 454 procedure.
Step 5 Recreate the circuit for the correct size.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
AUTH-EC
Default Severity: Major (MJ), Non-Service-Affecting (NSA)
Logical Objects: OTU
The Authentication Error Count (AUTH-EC) alarm is raised when the authentication error count crosses the
authentication threshold.
Clear the AUTH-EC Alarm
SUMMARY STEPS
1. This alarm is cleared automatically when the authentication error count becomes less then authentication
error threshold.
DETAILED STEPS
This alarm is cleared automatically when the authentication error count becomes less then authentication error threshold.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
AUTO-SENSE
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: PPM
The AUTO-SENSE alarm is raised when the port detects an incoming signal on the port. The alarm clears
automatically after detecting the signal.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
131
Alarm Troubleshooting
AUTH-EC

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English