Cisco NCS 2000 series Troubleshoot Manual

Clear the TIM-S Alarm
SUMMARY STEPS
1. Double-click the DS3/EC1-48 card to open the card view.
2. Click the Provisioning > EC1 > Section Trace tabs.
3. Choose the port from the Port pull-down.
4. In the Expected area, enter the correct string into the Current Expected String field.
5. Click Apply.
DETAILED STEPS
Step 1 Double-click the DS3/EC1-48 card to open the card view.
Step 2 Click the Provisioning > EC1 > Section Trace tabs.
Step 3 Choose the port from the Port pull-down.
Step 4 In the Expected area, enter the correct string into the Current Expected String field.
Step 5 Click Apply.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
TRAF-AFFECT-RESET-REQUIRED
Default Severity: Minor (MN) and Non-Service affecting (NSA)
Logical Object: CARD
The Traffic Affecting Reset required alarm is raised when you have to reset the MR-MXP cards. This reset
impacts the traffic.
Clear the TRAF-AFFECT-RESET-REQUIRED Alarm
Step 1 Display the MR-MXP card in the card view.
Step 2 Click the Provisioning > Card > Operating Modes tabs.
Step 3 Click the FGPA/FIRWAREUpgrade/TrafficAffectingReset button.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
418
Alarm Troubleshooting
Clear the TIM-S Alarm

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English