Cisco NCS 2000 series Troubleshoot Manual

If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
SSM-PRC
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Primary Reference Clock (PRC) Traceable condition occurs when the SONET transmission level
for ADM-10G and MXP trunk ports is PRC.
SSM-PRC is an informational condition and does not require troubleshooting.
Note
SSM-PRS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Primary Reference Source (PRS) Traceable condition occurs when the SSM transmission level for
ADM-10G and MXP trunk ports is Stratum 1 Traceable.
SSM-PRS is an informational condition and does not require troubleshooting.
Note
SSM-RES
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Reserved (RES) For Network Synchronization Use condition occurs when the synchronization
message quality level for ADM-10G and MXP trunk ports is RES.
SSM-RES is an informational condition and does not require troubleshooting.
Note
SSM-SMC
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
404
Alarm Troubleshooting
SSM-PRC

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English