Cisco NCS 2000 series Troubleshoot Manual

Clear the VOA-HDEG Alarm
SUMMARY STEPS
1. Complete the Physically Replace a Card, on page 453 procedure for the alarmed card.
DETAILED STEPS
Complete the Physically Replace a Card, on page 453 procedure for the alarmed card.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
VOA-HFAIL
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Objects: AOTS, OCH, OMS, OTS
The VOA High Fail alarm is raised on DWDM cards when an equipped VOA exceeds the setpoint due to an
internal problem. The alarm indicates that the attenuation has crossed the high fail threshold. The card must
be replaced.
Clear the VOA-HFAIL Alarm
SUMMARY STEPS
1. Complete the Physically Replace a Card, on page 453 procedure for the alarmed card.
DETAILED STEPS
Complete the Physically Replace a Card, on page 453 procedure for the alarmed card.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into http://www.cisco.com/c/
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
VOA-LMDEG
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Objects: AOTS, OCH, OMS, OTS
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
432
Alarm Troubleshooting
Clear the VOA-HDEG Alarm

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English