Cisco NCS 2000 series Troubleshoot Manual

OTDR-HYBRID-SCAN-IN-PROGRESS-RX
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: PPM
The Optical Time Domain Reflectometer (OTDR) Hybrid Scan In Progress RX condition occurs when a
hybrid OTDR scan starts in the RX direction.
Clear the OTDR-HYBRID-SCAN-IN-PROGRESS-RX Alarm
Step 1 This alarm is cleared automatically when the hybrid OTDR scan in the RX direction is complete.
Step 2 Alternatively, stop the scan by navigating to: Maintenance->DWDM->OTDR; select the side where the scan is ongoing
and click Cancel. The scan is stopped on both the sides.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
OTDR-HYBRID-SCAN-IN-PROGRESS-TX
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: PPM
The Optical Time Domain Reflectometer (OTDR) Hybrid Scan In Progress TX condition occurs when a
hybrid OTDR scan starts in the TX direction.
Clear the OTDR-HYBRID-SCAN-IN-PROGRESS-TX Alarm
Step 1 This alarm is cleared automatically when the hybrid OTDR scan in the TX direction is complete.
Step 2 Alternatively, stop the scan by navigating to: Maintenance->DWDM->OTDR; select the side where the scan is ongoing
and click Cancel. The scan is stopped on both the sides.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
OTDR-ORL-THRESHOLD-EXCEEDED-RX
Default Severity: Minor (MN)
Logical Object: EQUIPMENT
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
335
Alarm Troubleshooting
OTDR-HYBRID-SCAN-IN-PROGRESS-RX

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English