Cisco NCS 2000 series Troubleshoot Manual

FAPS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: TRUNK
The Fast Automatic Protection Switching condition is applicable to GEXP/10GEXP cards. This condition
occurs when the protection port, on the master card, switches from blocking to forwarding state.
Clear the FAPS Alarm
SUMMARY STEPS
1. When the cause of switching disappears, the protection port switches from the forwarding to the blocking
state, and the FAPS alarm clears.
DETAILED STEPS
When the cause of switching disappears, the protection port switches from the forwarding to the blocking state, and the
FAPS alarm clears.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
FAPS-CONFIG-MISMATCH
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Fast Automatic Protection Switching (FAPS) Config Mismatch condition is raised when a GE-XP or
10GE-XP card that is provisioned as a master card in a FAPS ring, resets or when one of the master card’s
trunk port is not set to Blocking.
Clear the FAPS-CONFIG-MISMATCH Condition
SUMMARY STEPS
1. Check the configuration of the master card. Ensure that at least one of the trunk ports of the master card
is in the blocking state and the FAPS ring is complete.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
194
Alarm Troubleshooting
FAPS

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English