Cisco NCS 2000 series Troubleshoot Manual

If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
SSM-TNC
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Transit Node Clock (TNC) Traceable condition occurs when the synchronization message quality
level is TNC for ADM-10G and MXP trunk ports.
SSM-TNC is an informational condition and does not require troubleshooting.
Note
SW-MISMATCH
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: EQPT
The Software Mismatch condition occurs during software upgrade when there is a mismatch between software
versions.
Clear the SW-MISMATCH Condition
SUMMARY STEPS
1. Complete the Reset a Card in CTC, on page 449 procedure for the errored card.
DETAILED STEPS
Complete the Reset a Card in CTC, on page 449 procedure for the errored card.
If the condition does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html
for more information or call Cisco TAC (1 800 553-2447).
SWTOPRI
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: EXT-SREF, NE-SREF
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
407
Alarm Troubleshooting
SSM-TNC

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English