Cisco NCS 2000 series - Off-Load the Diagnostics File

In addition to the machine-readable diagnostics file, the system stores an audit trail of all system events such
as user log-ins, remote log-ins, configuration, and changes. This audit trail is considered a record-keeping
feature rather than a troubleshooting feature.
Note
Off-Load the Diagnostics File
The diagnostics operation is performed at a shelf level. Only single-node-related diagnostic information can
be downloaded at a time.
Note
The diagnostic files retrieved by CTC depends on the user privilege levels. Table 3: Diagnostic Files Retrieved
Based on User Privilege, on page 35 lists the user privilege levels and the diagnostic retrieval operations they
can perform.
Table 3: Diagnostic Files Retrieved Based on User Privilege
Diagnostic File Retrieval OperationUser Privilege Level
• Export the unfiltered alarm table contents
• Export the unfiltered conditions table contents
• Export the unfiltered history table contents
• Export the inventory table contents
• CTC Dump Diagnostics log
Retrieve
• All Retrieve level access operations
• Save the node database
Maintenance
• All Maintenance level access operations
• Retrieve and save the node-level diagnostics report. (If secure mode is not set
on the node.)
• Export the audit table contents. (If the
NODE.security.grantPermission.RetrieveAuditLog NE Default is set to
Provisioning.)
Provisioning
• All Provisioning level access operations
• Retrieve and save the node-level diagnostics report
• Export the audit table contents
Superuser
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
35
General Troubleshooting
Off-Load the Diagnostics File