Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 117
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Provisioning CUCM CTL Show
Shows the content of the installed Certificate Trust List file (CTL), if it exists. Each entry
displayed contains the information about one specific certificate. If a certificate has been
deleted in CTL, it is marked accordingly in the output.
Requires user role: USER
USAGE:
xCommand Provisioning CUCM CTL Show
xCommand Provisioning StartUpgrade
The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: USER
USAGE:
xCommand Provisioning StartUpgrade
Proximity commands
xCommand Proximity Services Activate
Reactivate the Proximity services that were deactivated with xCommand Proximity Services
Deactivate.
Requires user role: USER
USAGE:
xCommand Proximity Services Activate
xCommand Proximity Services Deactivate
This command deactivates all proximity services on the endpoint. To reactivate proximity
services use the command xCommand Proximity Services Activate.
Requires user role: USER
USAGE:
xCommand Proximity Services Deactivate
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W