Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 99
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand CallHistory Get
Retrieve all information on previous calls made on the video system.
Requires user role: USER
USAGE:
xCommand CallHistory Get [Filter: Filter] [Offset: Offset] [Limit: Li mit]
[D etailLevel: DetailLevel] [SearchString: "SearchString"] [C allHistoryId:
CallH istor yId]
where
Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed
You can filter which calls to retrieve.
Offset: Integer (0..65534)
Sets the call from which to start.
Limit: Integer (0..65534)
Defines the amount of calls in the output.
DetailLevel: Basic/Full
Sets the level of detail for the information on these calls.
SearchString: String ( 0, 255)
Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: Integer (0..65534)
CallHistoryId for the call in question.
xCommand CallHistory Recents
Retrieve aggregated information on previous calls made on the video system.
Requires user role: USER
USAGE:
xCommand CallHistory Recents [Filter: Filter] [Offset: Offset] [Limit: Li m it]
[D etailLevel: DetailLevel] [SearchString: "SearchString"] [C allHistoryId:
CallH istor yId] [Order: Order]
where
Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed
You can filter which calls to retrieve.
Offset: Integer (0..65534)
Sets the call from which to start.
Limit: Integer (0..65534)
Defines the amount of calls in the output.
DetailLevel: Basic/Full
Sets the level of detail for the information on these calls.
SearchString: String (0, 255)
Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: Integer (0..65534)
CallHistoryId for the call in question.
Order: OccurrenceTime/OccurrenceFrequency
Define the order in which the previous calls are presented.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W