Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 143
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Cameras SpeakerTrack LeftCamera VideoInputConnector
Returns the number of the HDMI connector used for the left camera on a SpeakerTrack camera.
Value space of the result returned:
0/1/2/3
Example:
xStatus Cameras SpeakerTrack LeftCamera VideoInputConnector
*s Cameras SpeakerTrack LeftCamera VideoInputConnector: 0
** end
xStatus Cameras SpeakerTrack RightCamera VideoInputConnector
Returns the number of the HDMI connector used for the right camera on a SpeakerTrack
camera.
Value space of the result returned:
0/1/2/3
Example:
xStatus Cameras SpeakerTrack RightCamera VideoInputConnector
*s Cameras SpeakerTrack RightCamera VideoInputConnector: 0
** end
xStatus Cameras SpeakerTrack Status
Shows whether speaker tracking is set to active or inactive.
Value space of the result returned:
Active/Inactive
Example:
xStatus Cameras SpeakerTrack Status
*s Cameras SpeakerTrack Status: Active
** end
Capabilities status
xStatus Capabilities
Shows the top level overview of the capabilities status.
xStatus Capabilities Conference MaxActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer
are not counted as active.
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxNumberOfActiveCalls
*s Capabilities Conference MaxNumberOfActiveCalls: 3
** end
xStatus Capabilities Conference MaxAudioCalls
Shows the the maximum number of simultaneous audio calls that is supported.
Value space of the result returned:
Integer
Example:
xStatus Capabilities Conference MaxAudioCalls
*s Capabilities Conference MaxAudioCalls: 4
** end
xStatus Capabilities Conference MaxCalls
Shows the the maximum number of simultaneous calls.
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxCalls
*s Capabilities Conference MaxCalls: 3
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W