EasyManuals Logo

Cisco Telepresence MX800 Reference Guide

Cisco Telepresence MX800
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 162
Cisco TelePresence MX700 and MX800
API Reference Guide
SIP status
xStatus SIP
Shows the top level overview of the SIP status.
xStatus SIP AlternateURI Alias [n] URI
Value space of the result returned:
String
Example:
xStatus SIP AlternateURI Alias
*s SIP AlternateURI Alias URI: ""
** end
xStatus SIP AlternateURI Primary [n] URI
Value space of the result returned:
String
Example:
xStatus SIP AlternateURI Primary
*s SIP AlternateURI Primary URI: ""
** end
xStatus SIP Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol.
Off: No authentication mechanism is used.
Value space of the result returned:
Digest/Off
Example:
xStatus SIP Authentication
*s SIP Authentication: Off
** end
xStatus SIP CallForward DisplayName
Returns the URI that is displayed on the user interface for the forwarded call.
Value space of the result returned:
String
Example:
xStatus SIP CallForward DisplayName
*s SIP CallForward DisplayName: ""
** end
xStatus SIP CallForward Mode
Indicates whether the call forward mode for SIP is set to on or off.
Value space of the result returned:
On/Off
Example:
xStatus SIP CallForward Mode
*s SIP CallForward Mode: Off
** end
xStatus SIP CallForward URI
Indicates the address the incoming calls are directed to when call forward mode is set on.
Value space of the result returned:
String
Example:
xStatus SIP CallForward URI
*s SIP CallForward URI: ""
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xStatus

Table of Contents

Other manuals for Cisco Telepresence MX800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Telepresence MX800 and is the answer not in the manual?

Cisco Telepresence MX800 Specifications

General IconGeneral
Pan range-90 - 60 °
Product typeVideo conferencing service management system
Product colorWhite
Wall mountableYes
Tilt angle range-14 - 12 °
Number of persons- person(s)
Aspect ratio16:9
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.263, H.264, H.265
Resolution at capture speed1920x1080@60fps
Supported graphics resolutions352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel- MP
Sensor type-
Digital zoom2 x
Optical zoom10 x
Image sensor size- \
Closest focusing distance1 m
Ethernet LAN data rates10, 100, 1000 Mbit/s
Display diagonal70 \
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)591 W
Power consumption (typical)571 W

Related product manuals