Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 145
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Conference Call [n] Capabilities FECC Mode
Shows whether or not you have permission to control the input sources at a far end site.
On: Far end input source control is permitted.
Off: Far end input source control is not permitted.
Value space of the result returned:
On/Off
Example:
xStatus Conference Call 2 Capabilities FECC Mode
*s Conference Call 2 Capabilities FECC Mode: On
** end
xStatus Conference Call [n] Capabilities FECC NumberOfPresets
Shows the number of presets available for the input sources at a far end site.
Value space of the result returned:
1..15
Example:
xStatus Conference Call 2 Capabilities FECC NumberOfPresets
*s Conference Call 2 Capabilities FECC NumberOfPresets: 15
** end
xStatus Conference Call [n] Capabilities FECC NumberOfSources
Shows the number of input sources that can be connected at a far end site.
Value space of the result returned:
1..5
Example:
xStatus Conference Call 2 Capabilities FECC NumberOfSources
*s Conference Call 2 Capabilities FECC NumberOfSources: 5
** end
xStatus Conference Call [n] Capabilities FECC Source [n] Name
Shows the name of an input source that can be connected at a far end site.
Value space of the result returned:
String
Example:
xStatus Conference Call 2 Capabilities FECC Source 1 Name
*s Conference Call 2 Capabilities FECC Source 1 Name: "Main camera"
** end
xStatus Conference Call [n] Capabilities FECC Source [n] Options
Shows available options for an input source that can be connected at a far end site (for a
camera: p=pan; t=tilt; z=zoom; f=focus).
Value space of the result returned:
String
Example:
xStatus Conference Call 2 Capabilities FECC Source 1 Options
*s Conference Call 2 Capabilities FECC Source 1 Options: "ptzf"
** end
xStatus Conference Call [n] Capabilities FECC Source [n] SourceId
Shows the ID of an input source that can be connected at a far end site.
Value space of the result returned:
Integer
Example:
xStatus Conference Call 2 Capabilities FECC Source 1 SourceId
*s Conference Call 2 Capabilities FECC Source 1 SourceId: 6
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W