EasyManuals Logo

Cisco Telepresence MX800 Reference Guide

Cisco Telepresence MX800
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 141
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Call [n] Status
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold/EarlyMedia/Preserved/
RemotePreserved
Example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
xStatus Call [n] TransmitCallRate
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
Integer
Example:
xStatus Call 27 TransmitCallRate
*s Call 27 TransmitCallRate: 768
** end
Cameras status
xStatus Cameras Camera
Shows the top level overview of the camera status.
xStatus Cameras Camera [n] Capabilities Options
Shows the camera capabilities (ptzf = pan, tilt, zoom, focus).
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 Capabilities Options
*s Camera 1 Capabilities Options: "ptzf"
** end
xStatus Cameras Camera [n] Connected
Shows if the camera is connected or not.
Value space of the result returned:
True/False
Example:
xStatus Cameras Camera 1 Connected
*s Camera 1 Connected: True
** end
xStatus Cameras Camera [n] Flip
In Flip mode (vertical flip) the image can be flipped upside down.
Value space of the result returned:
Auto/On/Off
Example:
xStatus Cameras Camera 1 Flip
*s Camera 1 Flip: "Off"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xStatus

Table of Contents

Other manuals for Cisco Telepresence MX800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Telepresence MX800 and is the answer not in the manual?

Cisco Telepresence MX800 Specifications

General IconGeneral
Pan range-90 - 60 °
Product typeVideo conferencing service management system
Product colorWhite
Wall mountableYes
Tilt angle range-14 - 12 °
Number of persons- person(s)
Aspect ratio16:9
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.263, H.264, H.265
Resolution at capture speed1920x1080@60fps
Supported graphics resolutions352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel- MP
Sensor type-
Digital zoom2 x
Optical zoom10 x
Image sensor size- \
Closest focusing distance1 m
Ethernet LAN data rates10, 100, 1000 Mbit/s
Display diagonal70 \
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)591 W
Power consumption (typical)571 W

Related product manuals