Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 170
Cisco TelePresence MX700 and MX800
API Reference Guide
UserInterface status
xStatus UserInterface
Shows the top level overview of the video status.
xStatus UserInterface ContactInfo ContactMethod [n] Number
Returns the system's active contact information. This address is used to reach this endpoint.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo ContactMethod Number
*s UserInterface ContactInfo ContactMethod 1 Number: "12345678"
** end
xStatus UserInterface ContactInfo Name
Returns the system's active contact name. The result depends on which protocol, if any, the
system is registered on. The automatically set contact name may have been overridden with the
command xConfiguration UserInterface ContactInfo Type. This results in a diagnostics warning
about contact mismatch.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo Name
*s UserInterface ContactInfo Name: "MySystem"
** end
Video status
xStatus Video
Shows the top level overview of the video status.
xStatus Video ActiveSpeaker PIPPosition
Shows the position of the active speaker’s image on the screen.
Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight
Example:
xStatus Video ActiveSpeaker PIPPosition
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
xStatus Video Input
Shows the top level overview of the video input status.
xStatus Video Input Connector [n] Connected
Shows whether is something is connected to the specified connector. Not all connections can
be detected.
Value space of the result returned:
False/True/Unknown
Example:
xStatus Video Input Connector 1 Connected
*s Video Input Connector 1 Connected: True
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W