Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 152
Cisco TelePresence MX700 and MX800
API Reference Guide
Network status
xStatus Network
Shows the top level overview of the network status.
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
String
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network 1 CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation
for CDP protocol for more information.
Value space of the result returned:
String
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
xStatus Network 1 CDP DeviceId
Identifies the name of the switch in form of a character string.
Value space of the result returned:
String
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
String
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
String
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W