Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 69
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Provisioning Mode
It is possible to configure a video system using a provisioning system (external manager). This
allows video conferencing network administrators to manage many video systems simultane-
ously. With this setting you choose which type of provisioning system to use. Provisioning
can also be switched off. Contact your provisioning system provider/representative for more
information.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration Provisioning Mode: Mode
where
Mode : Off/Auto/TMS/VCS/CUCM/Edge
Off: The video system is not configured by a provisioning system.
Auto: Automatically select the provisioning server.
TMS: Push configurations to the video system from TMS (Cisco TelePresence
Management System).
VCS: Push configurations to the video system from VCS (Cisco TelePresence Video
Communication Server).
CUCM: Push configurations to the video system from CUCM (Cisco Unified
Communications Manager).
Edge: Push configurations to the video system from CUCM (Cisco Unified
Communications Manager). The system connects to CUCM via the Collaboration Edge
infrastructure.
xConfiguration Provisioning LoginName
This is the username part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Provisioning LoginNa me: "LoginName"
where
LoginName : String (0, 80)
A valid username.
xConfiguration Provisioning Password
This is the password part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Provisioning Password: "Password"
where
Password : String (0, 64)
A valid password.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W