Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 180
Cisco TelePresence MX700 and MX800
API Reference Guide
About disconnect cause types
The following parameters are logged when a call is discon-
nected. The disconnect cause types are used in disconnect
events (xEvent).
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: “LocalDisconnect”
CauseString: “”
OrigCallDirection: “outgoing”
RemoteURI: “firstname.lastname@company.com”
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

Appendices

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W