EasyManuals Logo

Cisco Telepresence MX800 Reference Guide

Cisco Telepresence MX800
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 154
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Network 1 DNS Domain Name
Shows the domain name.
Value space of the result returned:
String
Example:
xStatus Network 1 DNS Domain Name
*s Network 1 DNS Domain Name: "www.example.com www.example.int"
** end
xStatus Network 1 DNS Server [1..5] Address
Shows the IP address of the DNS server.
Value space of the result returned:
String
Example:
xStatus Network 1 DNS Server 1. Address
*s Network 1 DNS Server 1 Address: "192.0.2.60"
** end
xStatus Network 1 Ethernet MacAddress
Shows the MAC (Media Access Control) address for the Ethernet interface.
Value space of the result returned:
String
Example:
xStatus Network 1 Ethernet MacAddress
*s Network 1 Ethernet MacAddress: "00:50:60:02:FD:C7"
** end
xStatus Network 1 Ethernet Speed
Shows the Ethernet speed in Mbps. The speed can be in full-duplex or half-duplex.
Value space of the result returned:
10half/10full/100half/100full/1000full
Example:
xStatus Network 1 Ethernet Speed
*s Network 1 Ethernet Speed: "100full"
** end
xStatus Network 1 IPv4 Address
Shows the IPv4 address that uniquely identifies this system.
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 Address
*s Network 1 IPv4 Address: "192.0.2.149"
** end
xStatus Network 1 IPv4 Gateway
Shows the address of the IPv4 gateway.
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 Gateway
*s Network 1 IPv4 Gateway: "192.0.2.10"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xStatus

Table of Contents

Other manuals for Cisco Telepresence MX800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Telepresence MX800 and is the answer not in the manual?

Cisco Telepresence MX800 Specifications

General IconGeneral
Pan range-90 - 60 °
Product typeVideo conferencing service management system
Product colorWhite
Wall mountableYes
Tilt angle range-14 - 12 °
Number of persons- person(s)
Aspect ratio16:9
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.263, H.264, H.265
Resolution at capture speed1920x1080@60fps
Supported graphics resolutions352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel- MP
Sensor type-
Digital zoom2 x
Optical zoom10 x
Image sensor size- \
Closest focusing distance1 m
Ethernet LAN data rates10, 100, 1000 Mbit/s
Display diagonal70 \
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)591 W
Power consumption (typical)571 W

Related product manuals