EasyManuals Logo

Cisco Telepresence MX800 Reference Guide

Cisco Telepresence MX800
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 142
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Cameras Camera [n] MacAddress
Shows the MAC (Media Access Control) address for the camera.
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 MacAddress
*s Camera 1 MacAddress: ""
** end
xStatus Cameras Camera [n] Manufacturer
Shows the manufacturer of the camera.
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 Manufacturer
*s Camera 1 Manufacturer: "Cisco"
** end
xStatus Cameras Camera [n] Model
Shows the camera model.
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 Model
*s Camera 1 Model: "Precision 40"
** end
xStatus Cameras Camera [n] SerialNumber
Shows the camera serial number.
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 SerialNumber
*s Camera 1 SerialNumber: "B1AB26B00010"
** end
xStatus Cameras Camera [n] SoftwareID
Shows the software identity of the camera.
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 SoftwareID
*s Camera 1 SoftwareID: "S01718-4.0FINAL [ID:40063] 2014-10-20"
** end
xStatus Cameras SpeakerTrack Availability
Shows whether speaker tracking is available.
Off: Speaker tracking is turned off with the command xConfiguration Cameras SpeakerTrack
Mode: Off
Unavailable: Speaker tracking hardware is not found.
Available: Speaker tracking hardware and the two cameras are found, and it is possible to turn
speaker tracking on or off.
Value space of the result returned:
Off/Unavailable/Available
Example:
xStatus Cameras SpeakerTrack Availability
*s Cameras SpeakerTrack Availability: Unavailable
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xStatus

Table of Contents

Other manuals for Cisco Telepresence MX800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Telepresence MX800 and is the answer not in the manual?

Cisco Telepresence MX800 Specifications

General IconGeneral
Pan range-90 - 60 °
Product typeVideo conferencing service management system
Product colorWhite
Wall mountableYes
Tilt angle range-14 - 12 °
Number of persons- person(s)
Aspect ratio16:9
Maximum frame rate60 fps
Supported video modes720p, 1080p
Video formats supportedH.261, H.263, H.264, H.265
Resolution at capture speed1920x1080@60fps
Supported graphics resolutions352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel- MP
Sensor type-
Digital zoom2 x
Optical zoom10 x
Image sensor size- \
Closest focusing distance1 m
Ethernet LAN data rates10, 100, 1000 Mbit/s
Display diagonal70 \
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (max)591 W
Power consumption (typical)571 W

Related product manuals