Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 39
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Audio Input Microphone [1..8] EchoControl Mode
The echo canceller continuously adjusts itself to the audio characteristics of the room and
compensate for any changes it detects in the audio environment. If the changes in the audio
conditions are very significant the echo canceller may take a second or two to re-adjust.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone n EchoControl Mode: Mode
where
Mode : Off/On
Off: Echo Control should be switched Off if external echo cancellation or playback
equipment is used.
On: Echo Control is normally set to On to prevent the far end from hearing their own
audio. Once selected, echo cancellation is active at all times.
xConfiguration Audio Input Microphone [1..8] EchoControl NoiseReduction
The system has a built-in noise reduction which reduces constant background noise (for
example noise from air-conditioning systems, cooling fans etc.). In addition, a high pass filter
(Humfilter) reduces very low frequency noise. Requires the Echo Control Mode to be enabled
for the microphone.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone n EchoControl NoiseReduction:
NoiseReduction
where
NoiseReduction : Off/On
Off: Turn off the Noise Reduction.
On: The Noise Reduction should be enabled in the presence of low frequency noise.
xConfiguration Audio Input Microphone [1..8] EchoControl Dereverberation
The system has built-in signal processing to reduce the effect of room reverberation. Requires
the Echo Control Mode to be enabled for the microphone.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone n EchoControl Dereverberation:
Dereverberation
where
Dereverberation : Off/On
Off: Turn off the dereverberation.
On: Turn on the dereverberation.
xConfiguration Audio Input Microphone [1..8] Equalizer ID
Select the equalizer ID of the source that is connected to the microphone input.
Requires user role: ADMIN
Default value: 1
USAGE:
xConfiguration Audio Input Microphone n Equalizer ID: ID
where
ID : Integer (1..8)
Set the equalizer ID.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W