Cisco Telepresence MX800 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 181
Cisco TelePresence MX700 and MX800
API Reference Guide
User documentation for the Cisco TelePresence
products is available at
 http://www.cisco.com/go/telepresence/docs
Choose a product category in the right pane until you
find the correct product. This is the path you have to
follow:
Collaboration Room Endpoints >
Cisco TelePresence MX Series
Alternatively, use the following short-link to find the
documentation:
http://www.cisco.com/go/mx-docs
The documents are organized in the following categories:
Install and Upgrade > Install and Upgrade Guides
• Installation guides: How to install the product
• Getting started guide: Initial configurations required to
get the system up and running
• RCSI guide: Regulatory compliance and safety
information
Maintain and Operate > Maintain and Operate Guides
• Getting started guide: Initial configurations required to
get the system up and running
• Administrator guide: Information required to administer
your product
• Administering CE Endpoints on CUCM: Tasks to
perform to start using the product with the Cisco
Unified Communications Manager (CUCM)
Maintain and Operate > End-User Guides
• User guides: How to use the product
• Quick reference guides: How to use the product
Reference Guides | Command references
• API reference guides: Reference guide for the
Application Programmer Interface (API)
Reference Guides > Technical References
• CAD drawings: 2D CAD drawings with measurements
Design > Design Guides
• Video conferencing room guidelines: General guide-
lines for room design and best practice
• Video conferencing room guidelines: Things to do to
improve the perceived audio quality
Software Downloads, Release and General Information >
Licensing Information
• Open source documentation: Licenses and notices for
open source software used in this product
Software Downloads, Release and General Information >
Release Notes
• Software release notes
User documentation on the Cisco web site
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

Appendices

Cisco Telepresence MX800 Specifications

General

Pan range	-90 - 60 °
Product type	Video conferencing service management system
Product color	White
Wall mountable	Yes
Tilt angle range	-14 - 12 °
Number of persons	- person(s)
Aspect ratio	16:9
Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.263, H.264, H.265
Resolution at capture speed	1920x1080@60fps
Supported graphics resolutions	352 x 288, 512 x 288, 1024 x 576 (WSVGA), 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA)
Megapixel	- MP
Sensor type	-
Digital zoom	2 x
Optical zoom	10 x
Image sensor size	- \
Closest focusing distance	1 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Display diagonal	70 \
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	591 W
Power consumption (typical)	571 W