This setpoint selects the Ethernet connection mode.
DISABLED:
This is a standard mode in which the controller listens to the incoming traffic
and answers the TCP/IP queries addressed to it. This mode requires the
controller to be accessible from the remote device (PC), i.e. it must be
accessible at a public and static IP address if you want to connect to it from
the internet.
ENABLED:
This mode uses the “AirGate” service, which hides all issues with
static/public address in a black box and you do not need to do anything
about it. You need only a connection to the Internet. The AirGate server
address is adjusted by the setpoint AirGate IP.
This setpoint is used for entering the domain name or IP address of the
AirGate server. Use the free AirGate server provided by ComAp at
airgate.comap.cz if your company does not operate its own AirGate server.
To Next Page
Loading...
Need help?
General
